The m3 bolt and lockwasher are way too small to properly attach the chassis ground to the top extrusion in this way. The eyelet in the chassis ground wire is far too big to attach in this manner. I had to use two m3 washers to install the ground wire with sufficient attachment strength and reliability.
My Magnetic bed and Keenovo heater has no ground wire nor was there a step to add it to the bed?There is no ground wire in the kit to add to the bed either. There is no place on the bed to add a ground wire as well. This seems like an important detail to be skipped altogether.
My kit came with 5 M4 x 10mm SCHS screws not 6 and it did have 3 M4 nuts. Please count these fasteners and make the necessary changes to the kits for future customers. Obviously this is an issue. My kit had no M4 button Head screws either.
How am I supposed to attach these two parts with 6 4mm x 10mm SHCS when my kit only comes with 5 and there are no button head cap screws in this kit? Why only 5?
The m3 bolt and lockwasher are way too small to properly attach the chassis ground to the top extrusion in this way. The eyelet in the chassis ground wire is far too big to attach in this manner. I had to use two m3 washers to install the ground wire with sufficient attachment strength and reliability.
My Magnetic bed and Keenovo heater has no ground wire nor was there a step to add it to the bed?There is no ground wire in the kit to add to the bed either. There is no place on the bed to add a ground wire as well. This seems like an important detail to be skipped altogether.
Why can’t they just edit the directions to say M3 x 16 SHCS? I had no M3 X 16 or 20 mm button head screws in my kit.
My kit came with 5 M4 x 10mm SCHS screws not 6 and it did have 3 M4 nuts. Please count these fasteners and make the necessary changes to the kits for future customers. Obviously this is an issue. My kit had no M4 button Head screws either.
How am I supposed to attach these two parts with 6 4mm x 10mm SHCS when my kit only comes with 5 and there are no button head cap screws in this kit? Why only 5?
I have the LDO-42STH40-1684MAC Steppers also. They say 0.9 degree not 1,8. Is this an issue?