Skip to main content
Help

Pending Edits to I) Y Rail Installation

Step #4 edited: [Step edited]

Edited by Chase Daigle (112)

(You don’t have enough reputation to patrol this edit.)

[title] Insert Y Rail into X Carriages
-[* 1] To insert the Y rail into the X carriages it gets oriented as in the image. Be sure the "inside' faces with the text milled into them face each other.
+[* 1] To insert the Y rail into the X carriages it gets oriented as in the image. Be sure the "inside' faces with the text milled into them face each other. The line engraved in the linear guide block should be facing up (this should also put any laser engraved text right side up) take a moment to ensure all 3 rails are oriented correctly.
[* 1] There is a round metal spacer that goes between the Y rail and the horizontal part of the carriage. Lightly tighten the horizontal M3 bolt to hold it in place.
[* 1] There is a flat aluminum spacer that goes under the Y rail. Lightly tighten vertical bolt under the Rail against that spacer.