You're viewing a previously published revision of this guide. View latest revision

Jun 15, 2020 - 01:06:36

Apr 07, 2023 - 07:04:30 Aug 08, 2021 - 05:08:11 Aug 08, 2021 - 05:08:45 Jul 19, 2020 - 08:07:51 Jul 19, 2020 - 08:07:14 Jul 19, 2020 - 08:07:09 Jul 12, 2020 - 10:07:11 Jun 20, 2020 - 07:06:38 Jun 20, 2020 - 12:06:44 Jun 16, 2020 - 06:06:28 Jun 15, 2020 - 01:06:52 Jun 15, 2020 - 01:06:56 Jun 15, 2020 - 01:06:38 Jun 15, 2020 - 01:06:30 Jun 15, 2020 - 01:06:21 Jun 15, 2020 - 01:06:43 Jun 15, 2020 - 01:06:45 Jun 15, 2020 - 01:06:33 Jun 15, 2020 - 01:06:36 Jun 15, 2020 - 01:06:18 Jun 15, 2020 - 01:06:27 Jun 15, 2020 - 01:06:16 Jun 15, 2020 - 12:06:22 Jun 15, 2020 - 12:06:16 Jun 15, 2020 - 09:06:15 Jun 15, 2020 - 09:06:59 Jun 15, 2020 - 09:06:24 Jun 15, 2020 - 09:06:03 Jun 15, 2020 - 09:06:53 Jun 15, 2020 - 09:06:41 Jun 15, 2020 - 09:06:29

Newer

R) Firmware, Config, and Smoke Test

Written By: Tony Akens (and one other contributor)

Comments: 4
Favorites: 0
Completions: 9

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Step 1 A Word of Warning

It can be tempting to rush ahead - you're almost done, after all, and you want to see your printer print. Don't rush these steps.
Read each step carefully, and follow the instructions closely, you'll save yourself a lot of time and headache.
If at any point you feel over your head here, stop and ask questions in the RailCore Discord (Best option) or RailCore Facebook group.

Step 2 Connecting to your Duet

Before Powering on the first time, You need to connect to your duet with a USB cable.

Before Powering on the first time, You need to connect to your duet with a USB cable.
Follow the instructions here for getting connected to your Duet. You can use YAT as suggested, or any other serial console program.
Don't worry about upgrading your firmware yet, but take note of the version installed.
https://duet3d.dozuki.com/Guide/1.)+Gett...
Send an M115 command to your Duet, be sure you see "Duet 2 WiFi + Duex 5" in the output.
Continue following the instructions to get the Duet connected to your network.
Validate you can reach your Duet via Duet Web control before disconnecting the USB. When you unplug the USB the duet will lose power.