You're viewing a previously published revision of this guide. View latest revision

Mar 21, 2020 - 12:03:24

Dec 27, 2020 - 05:12:07 Dec 27, 2020 - 05:12:33 Dec 27, 2020 - 05:12:47 Dec 27, 2020 - 05:12:41 Jun 20, 2020 - 12:06:25 Jun 15, 2020 - 04:06:55 Jun 15, 2020 - 04:06:44 Jun 15, 2020 - 04:06:39 Jun 15, 2020 - 06:06:29 Jun 15, 2020 - 06:06:52 Apr 23, 2020 - 02:04:37 Apr 23, 2020 - 02:04:12 Apr 23, 2020 - 02:04:37 Apr 23, 2020 - 02:04:15 Mar 22, 2020 - 11:03:45 Mar 22, 2020 - 11:03:17 Mar 22, 2020 - 11:03:33 Mar 22, 2020 - 11:03:03 Mar 22, 2020 - 09:03:41 Mar 22, 2020 - 09:03:33 Mar 22, 2020 - 09:03:16 Mar 21, 2020 - 12:03:48 Mar 21, 2020 - 12:03:24 Mar 21, 2020 - 12:03:18 Mar 21, 2020 - 12:03:47 Mar 20, 2020 - 09:03:02 Mar 20, 2020 - 09:03:22 Oct 28, 2019 - 09:10:17 Oct 27, 2019 - 07:10:41 Oct 27, 2019 - 06:10:41 Oct 27, 2019 - 01:10:30 Oct 27, 2019 - 01:10:20 Oct 27, 2019 - 01:10:03 Oct 27, 2019 - 01:10:37 Oct 27, 2019 - 12:10:24 Oct 27, 2019 - 12:10:14 Oct 27, 2019 - 12:10:01 Oct 27, 2019 - 12:10:25 Oct 27, 2019 - 12:10:21 Oct 27, 2019 - 12:10:45 Oct 27, 2019 - 12:10:03 Oct 27, 2019 - 12:10:57 Oct 27, 2019 - 12:10:41 Oct 27, 2019 - 12:10:04 Oct 27, 2019 - 12:10:25 Oct 27, 2019 - 12:10:03 Oct 27, 2019 - 12:10:46 Oct 27, 2019 - 12:10:41 Oct 27, 2019 - 12:10:27 Oct 27, 2019 - 12:10:06 Oct 27, 2019 - 12:10:53 Oct 27, 2019 - 11:10:18 Oct 27, 2019 - 11:10:18 Oct 27, 2019 - 11:10:18 Oct 27, 2019 - 11:10:18 Oct 27, 2019 - 11:10:17 Oct 27, 2019 - 11:10:05

Newer

K) Y Carriage

Written By: Tony Akens (and one other contributor)

Comments: 10
Favorites: 0
Completions: 19

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Step 1 Y Carriage Installation

Before you bolt the Y Carriage onto the Y rail, double check that all the brass inserts are in.

Before you bolt the Y Carriage onto the Y rail, double check that all the brass inserts are in.
Bolt the Y Carriage to the Y rail using (4) m3 x 8mm button head bolts. Make sure they're snug.
You may want a dab of loctite on the bolts for attaching the Y carriage to the Rail, they're hard to get to later.

Step 2 Attach BLTouch to BLTouch Mount

Put (2) m3 x 16mm Button Head Bolts pointing up through the holes in the BLTouch.

Put (2) m3 x 16mm Button Head Bolts pointing up through the holes in the BLTouch.
Thread a brass insert down on the bolt, tight against the bltouch.
Pass the bolt up through the BLTouch mount
Put an m3 washer on the bolt, and then an m3 Nylock Nut.