You're viewing a previously published revision of this guide.  View latest revision

Older
Oct 26, 2019 - 10:10:21
Aug 04, 2021 - 03:08:59 Aug 04, 2021 - 03:08:13 Dec 31, 2020 - 11:12:41 Dec 29, 2020 - 02:12:49 Dec 29, 2020 - 01:12:22 Dec 29, 2020 - 01:12:08 Dec 29, 2020 - 01:12:01 Dec 29, 2020 - 01:12:25 Dec 29, 2020 - 01:12:26 Dec 29, 2020 - 01:12:22 Dec 29, 2020 - 01:12:32 Dec 29, 2020 - 08:12:45 Dec 29, 2020 - 08:12:13 Dec 29, 2020 - 08:12:57 Dec 29, 2020 - 08:12:43 Dec 29, 2020 - 08:12:25 Dec 29, 2020 - 08:12:06 Dec 29, 2020 - 08:12:13 Dec 29, 2020 - 08:12:21 Dec 29, 2020 - 08:12:45 Dec 29, 2020 - 08:12:46 Dec 29, 2020 - 08:12:36 Dec 29, 2020 - 07:12:30 Dec 28, 2020 - 03:12:30 Dec 28, 2020 - 03:12:10 Dec 28, 2020 - 03:12:13 Dec 28, 2020 - 03:12:00 Dec 28, 2020 - 03:12:18 Dec 27, 2020 - 05:12:46 Dec 27, 2020 - 05:12:20 Dec 27, 2020 - 05:12:13 Jul 12, 2020 - 10:07:40 Jul 12, 2020 - 10:07:36 Jul 12, 2020 - 10:07:26 Jun 20, 2020 - 12:06:27 Jun 20, 2020 - 09:06:55 Jun 20, 2020 - 09:06:40 Jun 20, 2020 - 09:06:18 Jun 15, 2020 - 03:06:56 Jun 15, 2020 - 03:06:01 Jun 08, 2020 - 07:06:53 Jun 08, 2020 - 07:06:44 Jun 07, 2020 - 11:06:37 Apr 30, 2020 - 09:04:32 Jan 07, 2020 - 10:01:49 Jan 07, 2020 - 10:01:40 Jan 07, 2020 - 10:01:31 Jan 07, 2020 - 10:01:58 Nov 03, 2019 - 11:11:36 Nov 03, 2019 - 11:11:27 Nov 03, 2019 - 11:11:18 Nov 03, 2019 - 11:11:01 Nov 03, 2019 - 10:11:23 Nov 03, 2019 - 09:11:29 Nov 03, 2019 - 09:11:33 Nov 03, 2019 - 09:11:16 Oct 30, 2019 - 10:10:36 Oct 30, 2019 - 10:10:52 Oct 30, 2019 - 10:10:36 Oct 30, 2019 - 10:10:31 Oct 30, 2019 - 10:10:29 Oct 30, 2019 - 10:10:48 Oct 30, 2019 - 09:10:27 Oct 30, 2019 - 09:10:07 Oct 30, 2019 - 09:10:28 Oct 30, 2019 - 09:10:13 Oct 30, 2019 - 09:10:42 Oct 30, 2019 - 09:10:00 Oct 30, 2019 - 09:10:32 Oct 28, 2019 - 09:10:37 Oct 27, 2019 - 06:10:44 Oct 27, 2019 - 01:10:38 Oct 26, 2019 - 11:10:05 Oct 26, 2019 - 11:10:19 Oct 26, 2019 - 11:10:49 Oct 26, 2019 - 11:10:08 Oct 26, 2019 - 11:10:43 Oct 26, 2019 - 11:10:44 Oct 26, 2019 - 11:10:12 Oct 26, 2019 - 11:10:58 Oct 26, 2019 - 10:10:54 Oct 26, 2019 - 10:10:21 Oct 26, 2019 - 10:10:09 Oct 26, 2019 - 10:10:32 Oct 26, 2019 - 10:10:29 Oct 26, 2019 - 10:10:33 Oct 26, 2019 - 10:10:17 Oct 26, 2019 - 10:10:07 Oct 26, 2019 - 10:10:19 Oct 26, 2019 - 10:10:36 Oct 26, 2019 - 10:10:56 Oct 26, 2019 - 10:10:53 Oct 26, 2019 - 10:10:08 Oct 26, 2019 - 10:10:35 Oct 26, 2019 - 10:10:17 Oct 26, 2019 - 10:10:21 Oct 26, 2019 - 10:10:08 Oct 26, 2019 - 10:10:25 Oct 26, 2019 - 10:10:25 Oct 26, 2019 - 10:10:15 Oct 26, 2019 - 10:10:50 Oct 26, 2019 - 10:10:23 Oct 26, 2019 - 10:10:04 Oct 26, 2019 - 10:10:57 Oct 26, 2019 - 10:10:20 Oct 26, 2019 - 10:10:46 Oct 26, 2019 - 10:10:41 Oct 26, 2019 - 10:10:14 Oct 26, 2019 - 10:10:10 Oct 26, 2019 - 10:10:05 Oct 26, 2019 - 10:10:59 Oct 26, 2019 - 10:10:55 Oct 26, 2019 - 10:10:50 Oct 26, 2019 - 10:10:45 Oct 26, 2019 - 10:10:39 Oct 26, 2019 - 10:10:32 Oct 26, 2019 - 10:10:25 Oct 26, 2019 - 10:10:19 Oct 26, 2019 - 10:10:09 Oct 26, 2019 - 10:10:36 Oct 26, 2019 - 09:10:59 Oct 26, 2019 - 09:10:59 Oct 26, 2019 - 09:10:59 Oct 26, 2019 - 09:10:59 Oct 26, 2019 - 09:10:58 Oct 26, 2019 - 09:10:58 Oct 26, 2019 - 09:10:58 Oct 26, 2019 - 09:10:58 Oct 26, 2019 - 09:10:58 Oct 26, 2019 - 09:10:58 Oct 26, 2019 - 09:10:57 Oct 26, 2019 - 09:10:57 Oct 26, 2019 - 09:10:32 Oct 26, 2019 - 09:10:17
Newer

RailCore II 300ZL Filastruder Kit - Top Extrusions Assembly

Written By: Tony Akens (and 3 other contributors)
  • Comments: 6
  • Favorites: 0
  • Completions: 33

Difficulty

Moderate

Steps

12

Time Required

Suggest a time??

Sections

1

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Quiz

0

  1. Lay Out Top Extrusions as pictured

    • Lay Out Top Extrusions as pictured

    • It can be helpful to use masking tape to add a label to the top of each extrusion indicating which it is (Top Back, Top Left, etc)

    • Be sure the Corner cubes have a larger hole facing up, smaller hole facing down.

  2. Bolt Corner Cube to Top Left 425mm Extrusion using (1) 8mm Button Head Bolt

    • Bolt Corner Cube to Top Left 425mm Extrusion using (1) 8mm Button Head Bolt

    • Note on the corner cube, the small hole is pointing to the right in this image

  3. Hold the Extrusion as it will be oriented on the printer (So the big hole on the corner cube faces up)

    • Hold the Extrusion as it will be oriented on the printer (So the big hole on the corner cube faces up)

    • Slide (8) m3 nuts into the top channel

    • Slide (5) m3 x 10mm Hex Head Bolts in the outside channel

    • Slide (4) m3 nuts in the inside channel

    • Slide (6) m3 x 16mm Hex Head bolts in the bottom channel

    • Note on the corner cube, the small hole is pointing to the right in this image

  4. Attach Second Corner Cube to Top Left Extrusion, be sure the large hole is up, small hole is down.

    • Attach Second Corner Cube to Top Left Extrusion, be sure the large hole is up, small hole is down.

    • Note on both corner cubes, the small hole is pointing to the right in this image

  5. Attach Top Front and Top Back Extrusions using (1) m3 x 8mm Button Head Bolt each.

    • Attach Top Front and Top Back Extrusions using (1) m3 x 8mm Button Head Bolt each.

  6. Add Hardware to Top Front and Top Back Extrusions

    • Add Hardware to Top Front and Top Back Extrusions

    • Install M3 Hardware into Linear Rail

    • Attach Linear rail to Top Front and Top Back Extrusions

    • Attach Corner Cube to Top Right Extrusion

    • Add Hardware to Top Right Extrusion

    • Attach Second Corner Cube to Top Right Extrusion

    • Attach Top Right Extrusion to the Rest of the Top Extrusion Assembly

Author

with 3 other contributors

Tony Akens

Member since: 10/26/19

12,131 Reputation

21 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 10

All Time: 2,561