Difficulty
Moderate
Steps
12
Time Required
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
Private
This guide will not appear in search results and can only be viewed by team members!
Quiz
0
-
-
Lay Out Top Extrusions as pictured
-
It can be helpful to use masking tape to add a label to the top of each extrusion indicating which it is (Top Back, Top Left, etc)
-
Be sure the Corner cubes have a larger hole facing up, smaller hole facing down.
-
-
-
Bolt Corner Cube to Top Left 425mm Extrusion using (1) 8mm Button Head Bolt
-
-
-
Hold the Extrusion as it will be oriented on the printer (So the big hole on the corner cube faces up)
-
Slide (8) m3 nuts into the top channel
-
Slide (5) m3 x 10mm Hex Head Bolts in the outside channel
-
Slide (4) m3 nuts in the inside channel
-
Slide (6) m3 x 16mm Hex Head bolts in the bottom channel
-
-
-
Attach Second Corner Cube to Top Left Extrusion, be sure the large hole is up, small hole is down.
-
-
-
Attach Top Front and Top Back Extrusions
-
-
-
Add Hardware to Top Front and Top Back Extrusions
-
-
-
Install M3 Hardware into Linear Rail
-
-
-
Attach Linear rail to Top Front and Top Back Extrusions
-
-
-
Attach Corner Cube to Top Right Extrusion
-
-
-
Add Hardware to Top Right Extrusion
-
-
-
Attach Second Corner Cube to Top Right Extrusion
-
-
-
Attach Top Right Extrusion to the Rest of the Top Extrusion Assembly
-
