Difficulty
Moderate
Steps
3
Time Required
01:00:00
- C) Top Extrusions Assembly 3 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
User-Contributed Guide
This guide is not managed by the site's staff.
Private
This guide will not appear in search results and can only be viewed by team members!
Quiz
0
-
-
Lay Out Top Extrusions as pictured.
-
It can be helpful to use masking tape to add a label to the top of each extrusion indicating which it is (Top Back, Top Left, etc).
-
Be sure the Corner cubes have a larger hole facing up, smaller hole facing down.
-
-
-
Bolt Corner Cube to Top Left 270mm Extrusion using (1) M3 x 8mm Socket Head Cap Screw.
-
Note on the corner cube, the small hole is pointing to the right in this image.
-
-
-
Hold the Extrusion as it will be oriented on the printer (make sure the big hole on the corner cube faces up).
-
In the layout shown in the image, insert the acrylic spacer inserts and M3 nuts in the outer channel. There should be 2x 5mm spacers, 3x 81mm spacers, and 4 M3 nuts.
-
Slide (7) M3 nuts into the top channel.
-
Note on the corner cube, the small hole is pointing to the right in this image.
-
