You're viewing a previously published revision of this guide.  View latest revision

Older
Feb 03, 2022 - 06:02:27
Apr 18, 2022 - 04:04:13 Apr 18, 2022 - 04:04:31 Apr 04, 2022 - 07:04:34 Apr 04, 2022 - 07:04:33 Apr 04, 2022 - 06:04:28 Mar 31, 2022 - 09:03:17 Mar 31, 2022 - 09:03:36 Mar 31, 2022 - 08:03:43 Mar 31, 2022 - 08:03:31 Mar 31, 2022 - 08:03:24 Mar 31, 2022 - 08:03:01 Mar 31, 2022 - 08:03:34 Mar 31, 2022 - 08:03:20 Mar 31, 2022 - 08:03:05 Mar 31, 2022 - 08:03:51 Mar 31, 2022 - 08:03:28 Mar 31, 2022 - 08:03:00 Mar 31, 2022 - 08:03:37 Mar 31, 2022 - 08:03:06 Feb 05, 2022 - 10:02:54 Feb 05, 2022 - 10:02:25 Feb 05, 2022 - 10:02:43 Feb 03, 2022 - 08:02:07 Feb 03, 2022 - 08:02:37 Feb 03, 2022 - 08:02:17 Feb 03, 2022 - 08:02:48 Feb 03, 2022 - 08:02:14 Feb 03, 2022 - 08:02:15 Feb 03, 2022 - 08:02:11 Feb 03, 2022 - 08:02:19 Feb 03, 2022 - 08:02:01 Feb 03, 2022 - 08:02:24 Feb 03, 2022 - 08:02:55 Feb 03, 2022 - 08:02:31 Feb 03, 2022 - 08:02:48 Feb 03, 2022 - 07:02:18 Feb 03, 2022 - 07:02:46 Feb 03, 2022 - 07:02:18 Feb 03, 2022 - 07:02:44 Feb 03, 2022 - 07:02:32 Feb 03, 2022 - 07:02:13 Feb 03, 2022 - 07:02:50 Feb 03, 2022 - 07:02:16 Feb 03, 2022 - 07:02:04 Feb 03, 2022 - 06:02:27 Feb 03, 2022 - 06:02:46 Feb 03, 2022 - 06:02:43 Feb 03, 2022 - 06:02:24 Feb 03, 2022 - 05:02:21 Feb 03, 2022 - 05:02:43 Feb 03, 2022 - 05:02:55
Newer

C) Top Extrusions Assembly

Written By: Ben Withem (and one other contributor)
  • Comments: 0
  • Favorites: 0
  • Completions: 2

Difficulty

Moderate

Steps

2

Time Required

01:00:00

Sections

1

Flags

3

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

User-Contributed Guide

User-Contributed Guide

This guide is not managed by the site's staff.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. Lay Out Top Extrusions as pictured.

    • Lay Out Top Extrusions as pictured.

    • It can be helpful to use masking tape to add a label to the top of each extrusion indicating which it is (Top Back, Top Left, etc).

    • Be sure the Corner cubes have a larger hole facing up, smaller hole facing down.

  2. Bolt Corner Cube to Top Left 270mm Extrusion using (1) M3 x 8mm Socket Head Cap Screw. Note on the corner cube, the small hole is pointing to the right in this image.

    • Bolt Corner Cube to Top Left 270mm Extrusion using (1) M3 x 8mm Socket Head Cap Screw.

    • Note on the corner cube, the small hole is pointing to the right in this image.

Author

with 1 other contributor

Ben Withem

Member since: 1/2/22

10,412 Reputation

19 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 4

All Time: 289