{"conclusion_raw":"","conclusion_rendered":"","difficulty":"Moderate","documents":[],"flags":[],"guideid":17,"image":{"id":529,"guid":"WRuLEZtvVUw1GdMb","mini":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.mini","thumbnail":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.thumbnail","140x105":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.140x105","200x150":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.200x150","standard":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.standard","440x330":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.440x330","medium":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.medium","large":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.large","original":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.full"},"introduction_raw":"","introduction_rendered":"","introduction_json":{"type":"doc","content":[{"type":"paragraph"}]},"featured_document_embed_url":"","featured_document_thumbnail_url":"","locale":"en","parts":[],"prerequisites":[],"steps":[{"title":"Align the Belts","lines":[{"text_raw":"The first step is to align your belts.  Adjust the steppers so there's some tension - doesn't take much, just enough that the belts are straight.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"The first step is to align your belts.  Adjust the steppers so there's some tension - doesn't take much, just enough that the belts are straight."},{"text_raw":"Loosen the bolts holding each stepper and idler mount, and move them on the frame until the belts form 90 degree angles to each other.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Loosen the bolts holding each stepper and idler mount, and move them on the frame until the belts form 90 degree angles to each other."},{"text_raw":"If you have a Halo, this alignment is done automatically.","bullet":"icon_caution","bullet_styleid":9,"bullet_style":{"bullet_styleid":9,"type":"caution","is_default":0,"color_locked":0,"label":"Caution","description":null,"is_disabled":0,"bullet_color":"#c1280b","size":"medium","imageid":null,"char":"\\e602","last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"If you have a Halo, this alignment is done automatically."}],"guideid":17,"stepid":142,"orderby":1,"revisionid":977,"time_estimate":0,"imageURL":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.mini","media":{"type":"image","data":[{"id":529,"guid":"WRuLEZtvVUw1GdMb","mini":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.mini","thumbnail":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.thumbnail","140x105":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.140x105","200x150":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.200x150","standard":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.standard","440x330":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.440x330","medium":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.medium","large":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.large","original":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/WRuLEZtvVUw1GdMb.full"}]},"comments":[]},{"title":"Tension the Belts","lines":[{"text_raw":"Earlier in the process you should have made sure your belts are equal lengths, if you did, that will make getting proper tension easier.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Earlier in the process you should have made sure your belts are equal lengths, if you did, that will make getting proper tension easier."},{"text_raw":"Each X Carriage has two bolts retaining the Y rail in place. Loosen those bolts in both carriages just a little before proceeding. (They should still keep the rail in position, but should not be tight)","bullet":"icon_caution","bullet_styleid":9,"bullet_style":{"bullet_styleid":9,"type":"caution","is_default":0,"color_locked":0,"label":"Caution","description":null,"is_disabled":0,"bullet_color":"#c1280b","size":"medium","imageid":null,"char":"\\e602","last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Each X Carriage has two bolts retaining the Y rail in place. Loosen those bolts in both carriages just a little before proceeding. (They should still keep the rail in position, but should not be tight)"},{"text_raw":"Pull on the Front stepper in the mounts to lightly tension the front belt. You don't need too much tension.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Pull on the Front stepper in the mounts to lightly tension the front belt. You don't need too much tension."},{"text_raw":"Pull the rear stepper back in the mount until the measurements marked in red on the image are equal. (Measure from the right side of the Y rail marked in red, to the left side of the top right extrusion where marked in red).","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Pull the rear stepper back in the mount until the measurements marked in red on the image are equal. (Measure from the right side of the Y rail marked in red, to the left side of the top right extrusion where marked in red)."},{"text_raw":"1-2-3 blocks can be used in place of measuring.","bullet":"icon_caution","bullet_styleid":9,"bullet_style":{"bullet_styleid":9,"type":"caution","is_default":0,"color_locked":0,"label":"Caution","description":null,"is_disabled":0,"bullet_color":"#c1280b","size":"medium","imageid":null,"char":"\\e602","last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"1-2-3 blocks can be used in place of measuring."},{"text_raw":"Once the Y rail is squared you should re-tighten the bolts in the X carriages to retain the Y rail.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Once the Y rail is squared you should re-tighten the bolts in the X carriages to retain the Y rail."},{"text_raw":"Ideal belt tension is between 40 - 50hz as measured on the short spans on the left of the printer between the idler mounts.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Ideal belt tension is between 40 - 50hz as measured on the short spans on the left of the printer between the idler mounts."}],"guideid":17,"stepid":150,"orderby":2,"revisionid":855,"time_estimate":0,"imageURL":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/W5a35RY2E5wVFduZ.mini","media":{"type":"image","data":[{"id":527,"guid":"W5a35RY2E5wVFduZ","mini":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/W5a35RY2E5wVFduZ.mini","thumbnail":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/W5a35RY2E5wVFduZ.thumbnail","140x105":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/W5a35RY2E5wVFduZ.140x105","200x150":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/W5a35RY2E5wVFduZ.200x150","standard":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/W5a35RY2E5wVFduZ.standard","440x330":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/W5a35RY2E5wVFduZ.440x330","medium":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/W5a35RY2E5wVFduZ.medium","large":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/W5a35RY2E5wVFduZ.large","original":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/W5a35RY2E5wVFduZ.full"}]},"comments":[{"commentid":118,"locale":"en","context":"step","contextid":150,"parentid":null,"author":{"userid":44,"banned":null,"username":"Glen Hoag","unique_username":"stevedallas","join_date":1584831617,"image":{"id":-32,"guid":"default_avatar_placeholder_guid","original":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-06","mini":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-06.mini","thumbnail":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-06.thumbnail","140x105":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-06.140x105","200x150":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-06.200x150","standard":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-06.standard","440x330":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-06.440x330","medium":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-06.medium","large":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-06.large"},"reputation":1,"url":"https:\/\/railcore.dozuki.com\/User\/44\/Glen+Hoag","teams":[],"enabled":true},"title":"N) Aligning your RailCore","text_raw":"The Gates Carbon Drive app for tuning the belts is also available for iPhone at https:\/\/itunes.apple.com\/us\/app\/carbon-drive-bicycle-calculator\/id438346486?mt=8","text_rendered":"<p>The Gates Carbon Drive app for tuning the belts is also available for iPhone at <a href=\"https:\/\/itunes.apple.com\/us\/app\/carbon-drive-bicycle-calculator\/id438346486?mt=8\" rel=\"nofollow noopener noreferrer\" title=\"https:\/\/itunes.apple.com\/us\/app\/carbon-drive-bicycle-calculator\/id438346486?mt=8\">https:\/\/itunes.apple.com\/us\/app\/carbon-d...<\/a><\/p>","rating":0,"date":1599365716,"modified_date":1599365716,"status":"resolved","status_reason":"manual","numberOfReplies":0,"replies":[]},{"commentid":83,"locale":"en","context":"step","contextid":150,"parentid":null,"author":{"userid":15,"banned":null,"username":"Wade Wendorf","unique_username":"wwendorf","join_date":1572798381,"image":{"id":-32,"guid":"default_avatar_placeholder_guid","original":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-19","mini":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-19.mini","thumbnail":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-19.thumbnail","140x105":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-19.140x105","200x150":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-19.200x150","standard":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-19.standard","440x330":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-19.440x330","medium":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-19.medium","large":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-19.large"},"reputation":1,"url":"https:\/\/railcore.dozuki.com\/User\/15\/Wade+Wendorf","teams":[],"enabled":true},"title":"N) Aligning your RailCore","text_raw":"Feel free to add my alignment video if you like: https:\/\/youtu.be\/9-1PNzsmrZM","text_rendered":"<p>Feel free to add my alignment video if you like: <a href=\"https:\/\/youtu.be\/9-1PNzsmrZM\" rel=\"nofollow noopener noreferrer\">https:\/\/youtu.be\/9-1PNzsmrZM<\/a><\/p>","rating":0,"date":1592404949,"modified_date":1592404949,"status":"resolved","status_reason":"manual","numberOfReplies":0,"replies":[]},{"commentid":78,"locale":"en","context":"step","contextid":150,"parentid":null,"author":{"userid":72,"banned":null,"username":"Max Plastix","unique_username":"max_plastix","join_date":1588787106,"image":{"id":-32,"guid":"default_avatar_placeholder_guid","original":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-12","mini":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-12.mini","thumbnail":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-12.thumbnail","140x105":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-12.140x105","200x150":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-12.200x150","standard":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-12.standard","440x330":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-12.440x330","medium":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-12.medium","large":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-12.large"},"reputation":174,"url":"https:\/\/railcore.dozuki.com\/User\/72\/Max+Plastix","teams":[],"enabled":true},"title":"N) Aligning your RailCore","text_raw":"There is a free Android app from Gates, the maker of belts and pulleys, to help measure the vibration frequency by sound and your phone microphone.  It can be downloaded here https:\/\/play.google.com\/store\/apps\/details?id=com.gates.carbondrivecalculator&hl=en_US","text_rendered":"<p>There is a free Android app from Gates, the maker of belts and pulleys, to help measure the vibration frequency by sound and your phone microphone.  It can be downloaded here <a href=\"https:\/\/play.google.com\/store\/apps\/details?id=com.gates.carbondrivecalculator&amp;hl=en_US\" rel=\"nofollow noopener noreferrer\" title=\"https:\/\/play.google.com\/store\/apps\/details?id=com.gates.carbondrivecalculator&amp;amp;hl=en_US\">https:\/\/play.google.com\/store\/apps\/detai...<\/a><\/p>","rating":0,"date":1592269733,"modified_date":1592269733,"status":"resolved","status_reason":"manual","numberOfReplies":0,"replies":[]}]},{"title":"Centering the Linear Rails","lines":[{"text_raw":"Loosen all the bolts holding your linear rail to one Z extrusion.  Adjust the Rail so it's 20mm above the bottom panel.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Loosen all the bolts holding your linear rail to one Z extrusion.  Adjust the Rail so it's 20mm above the bottom panel."},{"text_raw":"Tighten only the top bolt holding the rail to the extrusion.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Tighten only the top bolt holding the rail to the extrusion."},{"text_raw":"Place the Rail Alignment Tool over the linear rail near the bottom bolt. This will center the linear rail on the extrusion.  Tighten the bottom bolt.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Place the Rail Alignment Tool over the linear rail near the bottom bolt. This will center the linear rail on the extrusion.  Tighten the bottom bolt."},{"text_raw":"Loosen the top bolt.  Now work your way up from the bottom, putting the rail alignment tool near each bolt, then tightening it.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Loosen the top bolt.  Now work your way up from the bottom, putting the rail alignment tool near each bolt, then tightening it."},{"text_raw":"Repeat this process for each of your Z rails.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Repeat this process for each of your Z rails."},{"text_raw":"Repeat this process for your X rails, working end to end.  Center the X rails in the extrusion.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Repeat this process for your X rails, working end to end.  Center the X rails in the extrusion."}],"guideid":17,"stepid":143,"orderby":3,"revisionid":863,"time_estimate":0,"imageURL":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/PStVy3I332CoTfHM.mini","media":{"type":"image","data":[{"id":530,"guid":"PStVy3I332CoTfHM","mini":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/PStVy3I332CoTfHM.mini","thumbnail":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/PStVy3I332CoTfHM.thumbnail","140x105":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/PStVy3I332CoTfHM.140x105","200x150":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/PStVy3I332CoTfHM.200x150","standard":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/PStVy3I332CoTfHM.standard","440x330":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/PStVy3I332CoTfHM.440x330","medium":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/PStVy3I332CoTfHM.medium","large":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/PStVy3I332CoTfHM.large","huge":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/PStVy3I332CoTfHM.huge","original":"https:\/\/d3t0tbmlie281e.cloudfront.net\/igi\/railcore\/PStVy3I332CoTfHM.full"}]},"comments":[]},{"title":"Aligning the Z Towers","lines":[{"text_raw":"There is a video on aligning the Z towers here: https:\/\/www.youtube.com\/watch?v=CNWzMLc5-Cg","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"There is a video on aligning the Z towers here: <a href=\"https:\/\/www.youtube.com\/watch?v=CNWzMLc5-Cg\" title=\"https:\/\/www.youtube.com\/watch?v=CNWzMLc5-Cg\">https:\/\/www.youtube.com\/watch?v=CNWzMLc5...<\/a>"},{"text_raw":"Loosen the bolts in the Z brackets for one tower, so it can move freely.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Loosen the bolts in the Z brackets for one tower, so it can move freely."},{"text_raw":"Lower the Z yoke by spinning the lead screw, until the yoke is just above the leadscrew coupler.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Lower the Z yoke by spinning the lead screw, until the yoke is just above the leadscrew coupler."},{"text_raw":"Tighten down the lower Z bracket, be sure the Z extrusion is pushed flush against the side extrusions as you tighten the brackets.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Tighten down the lower Z bracket, be sure the Z extrusion is pushed flush against the side extrusions as you tighten the brackets."},{"text_raw":"Move the yoke into the center of the Z tower.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Move the yoke into the center of the Z tower."},{"text_raw":"Use a calipers or a ruler to measure from your front panel to the Z extrusion at the bottom.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Use a calipers or a ruler to measure from your front panel to the Z extrusion at the bottom."},{"text_raw":"Repeat the same measurement near the top of the Z tower, and adjust until it's equal.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Repeat the same measurement near the top of the Z tower, and adjust until it's equal."},{"text_raw":"Tighten the top of the Z tower.  Repeat for all 3 towers.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Tighten the top of the Z tower.  Repeat for all 3 towers."}],"guideid":17,"stepid":151,"orderby":4,"revisionid":866,"time_estimate":0,"imageURL":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/guide\/NoImage_56x42.jpg","media":{"type":"image","data":[]},"comments":[]},{"title":"Adjust X Endstop","lines":[{"text_raw":"Loosen your X endstop mount.  Move it to the left side of the rear extrusion.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Loosen your X endstop mount.  Move it to the left side of the rear extrusion."},{"text_raw":"Manually move the Y rail until the hotend is approx 5mm from one of the left leadscrews.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Manually move the Y rail until the hotend is approx 5mm from one of the left leadscrews."},{"text_raw":"Move the X endstop to be against the rear X carriage, be sure the switch triggers.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Move the X endstop to be against the rear X carriage, be sure the switch triggers."},{"text_raw":"Tighten down the X endstop.","bullet":"black","bullet_styleid":1,"bullet_style":{"bullet_styleid":1,"type":"dot","is_default":1,"color_locked":1,"label":null,"description":null,"is_disabled":0,"bullet_color":"#11161a","size":"small","imageid":null,"char":null,"last_modified":1702940800,"userid_modified":1},"level":0,"lineid":null,"text_rendered":"Tighten down the X endstop."}],"guideid":17,"stepid":162,"orderby":5,"revisionid":907,"time_estimate":0,"imageURL":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/guide\/NoImage_56x42.jpg","media":{"type":"image","data":[]},"comments":[]}],"subject":"","summary":"Now that the build is done, its an ideal time to align your RailCore.","time_required":"No estimate","time_required_min":0,"time_required_max":0,"title":"N) Aligning your RailCore","tools":[],"type":"how-to","revisionid":1267,"guide_revisionid":903,"created_date":1592236819,"published_date":1592237290,"modified_date":1592682476,"prereq_modified_date":0,"public":true,"comments":[],"category":"RailCore II","url":"https:\/\/railcore.dozuki.com\/Guide\/N)+Aligning+your+RailCore\/17","body_url_path":"\/Guide\/N)+Aligning+your+RailCore\/17","patrol_threshold":5000,"can_edit":true,"can_delete":false,"can_edit_language":false,"can_edit_permissions":false,"should_use_granular_permissions":false,"favorited":false,"author":{"userid":2,"banned":null,"username":"Tony Akens","unique_username":"tonyakens","join_date":1572101294,"image":{"id":-32,"guid":"default_avatar_placeholder_guid","original":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-18","mini":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-18.mini","thumbnail":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-18.thumbnail","140x105":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-18.140x105","200x150":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-18.200x150","standard":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-18.standard","440x330":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-18.440x330","medium":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-18.medium","large":"https:\/\/d3015z1jd0uox2.cloudfront.net\/static\/images\/avatars\/User\/Dozuki\/single-avatar-2-18.large"},"reputation":12272,"url":"https:\/\/railcore.dozuki.com\/User\/2\/Tony+Akens","teams":[],"enabled":true},"langid":"en","featured_documentid":null,"intro_video_url":null,"intro_video":null,"intro_video_media_item":null,"completed":false,"per_step_time_enabled":false,"work_log_enabled":false,"work_log_url":"https:\/\/railcore.dozuki.com\/Guide\/data-capture\/17","ogdc_enabled":"inherit","number_of_dependent_guides":0}