Help
John O'Shaughnessy
@johnocfii
John O'Shaughnessy
| 101 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 10/26/2019 | |
| 101 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 10/26/2019 | |
With RRF 3.x the output from M119 has changed a bit. Now when X endstop is pressed, the output is: Endstops - X: at min stop, Y: not stopped, Z: no endstop, Z probe: not stopped
(Showing min-stop instead of stopped)