I’d recommend adding a few more nuts to the top channel, if your planning to enclose the printer, but also for things like a spool holder off the right side as well.
If you’re desire is to enclose the printer and/or use the interface kit to enclose the printer, I would recommend adding a 4-6 more nuts per side, to give yourself a more options for locking down the interface to the rail.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
The filastruder kit comes with a newer plug+switch combo, you should only have L/N/Earth Ground coming from it, no jump wires required.
I’d recommend adding a few more nuts to the top channel, if your planning to enclose the printer, but also for things like a spool holder off the right side as well.
If you’re desire is to enclose the printer and/or use the interface kit to enclose the printer, I would recommend adding a 4-6 more nuts per side, to give yourself a more options for locking down the interface to the rail.