Leon Grossman

I read “only snug up the nuts” as don’t over tighten not as, the last step of this section is for squaring and tightening. Don’t be like me and tighten in this stage, loosen and re-tighten to ensure the panels are below the top frame, curse, loosen and re-tighten for square.

It’s unclear from this step where the railing should be placed. I centered mine but I’m not far enough in this build to know if that is correct.

If you have the Misumi rails the 8mm bolts are too long without using the lock washers as spacers. Per discord, 6mm may work as an alternative.