Skip to main content

Site Navigation

Your Account

Choose Language


Step Type:

Drag to rearrange

Start by attaching the Layer fan and shroud. Attach the Layer fan to the bottom of the adapter using one m3x8mm Button head bolt into the rear hole (the one going to the m3 washer) and one m3 x 12mm Button head bolt that will pass through the other hole and into the brass insert in the Y carriage.

Attach the Y endstop mount to the bottom right two holes in the Y carriage using (2) m3 x 8mm Button Head Bolts

Your contributions are licensed under the open source Creative Commons license.