Before you bolt the Y Carriage onto the Y rail, double check that all the brass inserts are in.
Bolt the Y Carriage to the Y rail using (4) m3 x 8mm button head bolts. (Socket Cap Head Screws will not work here, use Button Head regardless of the kit you're building) Make sure they're snug.
You may want a dab of loctite on the bolts for attaching the Y carriage to the Rail, they're hard to get to later.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.