Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

Loosen the M3 x 10 socket head screws holding the Z rod holders to the frame.

Slide the (6) smooth rods through the top Z rod holder and through the Z yokes. Each Z yoke should be facing flat side up.

Fasten the (6) smooth rods to the Z rod holders by tightening the M3 x 20 socket head screws.

The top of the smooth rods should be flush with the top of Z rod holders.

Your contributions are licensed under the open source Creative Commons license.