Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

In the layout shown in the third image, insert the acrylic spacer inserts and M3 nuts in the outer and bottom channels of the back extrusion. There should be (2) 5mm spacers, (3) 81mm spacers, and (4) M3 nuts in each.

Slide (2) M3 nuts in the top channel of the back extrusion.

Slide (2) M3 nuts in the inside channel of the back extrusion.

In the layout shown in the third image, insert the acrylic spacer inserts and M3 nuts in the outer and bottom channels of the front extrusion. There should be (2) 5mm spacers, (3) 81mm spacers, and (4) M3 nuts in each.

Slide (2) M3 nuts in the inside channel of the front extrusion.

Slide (2) M3 nuts in the inside channel of the front extrusion.

Your contributions are licensed under the open source Creative Commons license.