Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

Slide (5) M3 x 16mm hex head bolts into the top channel.

In the layout shown in the second image, insert the acrylic spacer inserts and M3 nuts in the outer channel. There should be (2) 5mm spacers, (3) 81mm spacers, and (4) M3 nuts.

Slide (2) M3 nuts into the inside channel. Note: If using a metal bottom (base plate), these are not needed.

In the layout shown in the second image, insert the acrylic spacer inserts and M3 nuts in the bottom channel. There should be (2) 5mm spacers, (3) 81mm spacers, and (4) M3 nuts.

Your contributions are licensed under the open source Creative Commons license.