Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 11 —

Step Type:

Drag to rearrange

Assuming all of the previous homing tests have worked, or any issues encountered have been resolved, you can now proceed with automated homing and bed leveling.

Power off the printer, and adjust the bed manually by turning the leadscrews until it's close to level. It does not have to be perfect, but should be close.

Power on the printer, and run the following to home all 3 axis:

G28

To level the bed, send the following gcode:

G32

The printer should probe 4 points on the bed, and return a status of the adjustments made.

Your contributions are licensed under the open source Creative Commons license.