Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 5 —

Step Type:

Drag to rearrange

In the console for Duet Web Control, issue this gcode:

M119

It should return "Endstops - X: not stopped, Y: not stopped, Z: no endstop, Z probe: not stopped"

Hold in the button on the X endstop switch (the one to the rear left of the printer, and run M119 again.

You should now get "Endstops - X: stopped, Y: not stopped, Z: no endstop, Z probe: not stopped"

If none of the endstops show as stopped, check your X endstop connection

If the Y endstop shows as stopped, you have the endstops in the wrong ports. Power down and double check they're plugged in correctly.

Your contributions are licensed under the open source Creative Commons license.