Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 3 —

Step Type:

Drag to rearrange

This is much the same as the X stepper.

In the console window of Duet Web Control, run the following:


G1 H2 Y10 F3000

This should move the hotend in the +X and -Y Directions (towards the right side of the printer, and front of the printer)

If it does not, find this line in your config.g value, and change the S1 to S0

M569 P1 S1

Your contributions are licensed under the open source Creative Commons license.