Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 2 —

Step Type:

Drag to rearrange

These instructions are documented here as well: https://www.duet3d.com/wiki/Configuring_...

Starting with the hotend over the center of the bed, issue the following in the "console" window of the Duet Web Control

G91

G1 H2 X10 F3000

That should move your Hotend in +X +Y (towards the right and back of the printer)

If your hotend moves -X -Y (Left and front), find this line in the config.g and change the S0 to S1:

M569 P0 S0

If the Y (front) stepper moves, you have the steppers in the wrong ports. Power Down and change the cables to the correct ports - see the wiring instructions.

Your contributions are licensed under the open source Creative Commons license.