Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 5 —

Step Type:

Drag to rearrange

Connect to your Duet via the web interface.

Navigate to the Settings, Machine Specific and look under Electronics to see your Firmware version. Under Settings, General you can see the Duet Web Control (DWC) version. If you're not at Reprap Firmware 2.05.1, DuetWebControl 2.0.7, and DuetWiFiServer-1.23 (for WiFi versions), follow the steps below to upgrade.

Download and aip4e.bin from

In the Duet Web Control GUI, navigate to the "System" section and select UPLOAD SYSTEM FILES.

Upload iap4e.bin into System files. (It might be there already.)

Upload and reboot when prompted. Note that the .zip file should be sent as-is, and not extracted on your PC.

Check your firmware versions in the GUI to make sure they match the expected versions.

Your contributions are licensed under the open source Creative Commons license.