Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 31 —

Step Type:

Drag to rearrange

For the Z steppers it can help to lay the printer on its back.

Connect all 3 Z stepper wires to the steppers. Route them so they can reach the stepper motors on the bottom edge of the Duex5, using zip ties and the zip tie mounts to hold them to the bottom panel.

Connecting these steppers to the correct ports is critical, otherwise your bed leveling will not work correctly.

Connect the Front Left Z Stepper Cable to the Drive 5 port on the Duex5, which is labelled E2 MOT.

Your contributions are licensed under the open source Creative Commons license.