Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 5 —

Step Type:

Drag to rearrange

Attach the Duet and Duex5.

Be sure the Duet is on top, Duex5 is on bottom.

Pay careful attention to the orientation.

Mount them by putting one M3 x 16mm bolt through the board. Put the black nylon 5mm tall spacer behind the board.

The image says 20mm, it needs to be corrected.

Pass the bolts through the panel, attach with an M3 Washer and M3 nut.

Your contributions are licensed under the open source Creative Commons license.