Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

Place the bolt stack on the yoke, so the Nylock nut and m3 fender washer are below the Yoke, and the 1/4 rubber washer is on top of the yoke.

Repeat for all 3 yokes.

The right yoke gets a ground wire from the bed wiring harness above the top washer. (not yet pictured). This requires a 25mm bolt to do as shown, currently the kits ship with only 20mm bolts, leaving out the lower washer is temporary fix.

Your contributions are licensed under the open source Creative Commons license.