Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 2 —

Step Type:

Drag to rearrange

Skip this step if using an aluminum base plate

Insert (5) M3 x 10mm Hex Head Bolts into the bottom channel of one of the remaining 425mm Extrusions.

Lower the extrusion to the bottom panel so the bolts go through the 5 holes that go front to back in the panel, near the left side steppers.

Secure the bottom panel brace using (5) M3 washers and (5) M3 nuts on the bottom side of the printer.

Repeat this process for the brace on the right side of the bottom panel.

Your contributions are licensed under the open source Creative Commons license.