Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 6 —

Step Type:

Drag to rearrange

Insert the leadscrew down through the hole in the yoke, and into the leadscrew coupler.

You may need to slide the Z tower around to line it up so you can get the leadscrew into the coupler.

Tighten the grub screw in the coupler.

Insert (4) M3 x 12mm Button head bolts through the bottom of the yokes, and into the holes on the leadscrew nut flange. Do not overtighten, you can strip the Delrin.

Your contributions are licensed under the open source Creative Commons license.