Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Tony Akens

Edit approved by Tony Akens

Before
After
Unchanged

Step Lines

[title] Prep Hotend Groove Mount
-[* black] Install M3 Nuts in Hotend Groove Mount
+[* black] Insert one m3 nut into each side of the printed hotend mount. They can be hard to push in, using a screwdriver can help.
+[* icon_note] Push an allen wrench down through the bolt holes for attaching the hotend to center the M3 nuts, it will make threading a bolt in easier.