Changes to Step #8
Edit by Tony Akens —
Edit approved by Tony Akens
- Before
- After
- Unchanged
Step Lines
| [title] Squaring your Frame | |
| - | [* black] Tips for Squaring your Frame |
| - | [* black] Tighten Frame Nuts |
| + | [* black] Now is when you want to square up your frame. Start with the bottom panel, and get it as centered and even as you can. |
| + | [* black] With the printer laying on its back. Tighten all 5 nuts (including the feet) along one side of the bottom panel. Use a square or 123 blocks to square up the bottom extrusions, and tighten down the rest of the nuts on the bottom panel. |
| + | [* black] Repeat this process for each of the side panels, tightening the bolts along the bottom of each panel first. |
| + | [* icon_caution] Be sure the side panels do not protrude above the top extrusions before tightening them. |