Changes to Step #3

Edit by Ben Withem —

Edit approved by Ben Withem

Before
After
Unchanged

Step Lines

[title] Assemble Z Tower Extrusions (x2)
[* 1] The top of the Z towers will fasten to horizontal extrusions on the left and right sides of the frame.
-[* 1] Attach corner cubes to opposing ends of the extrusion with (1) M3 nuts inside the extrusion channel and (1) M3 x 10 socket head screw for each corner cube.
+[* 1] Attach corner cubes to opposing ends of the extrusion with (1) M3 nuts inside the extrusion channel and (1) M3 x 6 socket head screw for each corner cube.
[* 10] A small hole should face up and towards the outside of the extrusion. Use the image as a reference.