Skip to main content

Changes to Step #3

Edit by Ben Withem

Edit approved by Ben Withem

Before
After
Unchanged

Step Lines

-[title] Add Hardware into the Upright Extrusions
+[title] Attach Top Frame Assembly to Upright Bottom Frame Assembly
[* black] Use (4) M3 x 8mm Socket Cap Head Screws to attach the top extrusion assembly to the upright extrusions.
+[* icon_caution] Be sure both the bottom and top frame pieces are in the right orientation. The top right extrusion should have (13) M3 nuts in it's top channel. The bottom right extrusion should have (10) M3 nuts in it's top channel.