Skip to main content

Changes to Step #2

Edit by Ben Withem

Edit approved by Ben Withem

Before
After
Unchanged

Step Lines

+[title] Add Hardware into the Upright Extrusions
+[* black] Insert acrylic spacers in all extrusion channels facing the outside of the frame. Each extrusion has two outer facing channels.
+ [* black] In the layout shown in the second image, insert the acrylic spacer inserts and M3 nuts in all 8 of the outer facing channels. There should be (2) 5mm spacers, (3) 81mm spacers, and (4) M3 nuts in each channel.
+[* black] Insert (2) M3 nuts in each of the remaining 8 channels.

Image 1

No previous image

Added

Image 2

No previous image

Added