Skip to main content

Changes to Step #1

Edit by Ben Withem

Edit approved by Ben Withem

Before
After
Unchanged

Step Lines

[title] Add the Upright Extrusions to your Bottom Frame Assembly
-[* black] Use (1) M3 x 8mm Socket Cap Head Screw to attach each of the (4) 270mm upright extrusions to the corner cubes on the bottom frame assembly. Note: It can be helpful to prop the bottom frame assembly up on some old filament spools so that the upright extrusions remain vertical.
+[* black] Use (1) M3 x 8mm socket head screws to attach each of the (4) 270mm upright extrusions to the corner cubes on the bottom frame assembly.