Skip to main content

Changes to Step #8

Edit by Ben Withem

Edit approved by Ben Withem

Before
After
Unchanged

Step Lines

+[title] Add Hardware into Bottom Right Extrusion
+[* black] Slide (10) M3 x 16mm hex head bolts into the top channel.
+[* black] In the layout shown in the second image, insert the acrylic spacer inserts and M3 nuts in the outer channel. There should be (2) 5mm spacers, (3) 81mm spacers, and (4) M3 nuts.
+[* black] Slide (2) M3 nuts into the inside channel.
+[* black] In the layout shown in the second image, insert the acrylic spacer inserts and M3 nuts in the bottom channel. There should be (2) 5mm spacers, (3) 81mm spacers, and (4) M3 nuts.

Image 1

No previous image

Added

Image 2

No previous image

Added