Skip to main content

Changes to Step #10

Edit by Ben Withem

Edit approved by Ben Withem

Before
After
Unchanged

Step Lines

[title] Add Hardware to Top Right Extrusion
[* black] Slide (13) M3 nuts into the top channel.
-[* black] Slide (4) M3 nuts into the inside channel.
+[* black] Slide (6) M3 nuts into the inside channel.
[* black] Insert the acrylic spacer inserts and M3 nuts in the outer channel. There should be 2x 5mm spacers, 3x 81mm spacers, and 4 M3 nuts (See second image for reference).
[* icon_caution] Be sure the orientation of the corner cube is correct. A large hole should face up, a small hole should be facing down, and a small hole should be facing towards the inside channel.

Image 1

Old Version

New Version