Skip to main content

Changes to Step #3

Edit by Ben Withem

Edit approved by Ben Withem

Before
After
Unchanged

Step Lines

+[title] Add Hardware to Top Left Extrusion
+[* black] Hold the Extrusion as it will be oriented on the printer (make sure the big hole on the corner cube faces up).
+[* black] In the layout shown in the image, insert the acrylic spacer inserts and M3 nuts in the outer channel. There should be 2x 5mm spacers, 3x 81mm spacers, and 4 M3 nuts.
+[* black] Slide (7) M3 nuts into the top channel.
+[* icon_note] Note on the corner cube, the small hole is pointing to the right in this image.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added