Skip to main content

Changes to Step #2

Edit by Ben Withem

Edit approved by Ben Withem

Before
After
Unchanged

Step Lines

[title] Bolt Corner Cube to Top Left Extrusion
-[* black] Bolt Corner Cube to Top Left 270mm Extrusion using (1) M3 x 8mm Socket Head Cap Screw.
+[* black] Bolt corner cube to top left 270mm extrusion using (1) M3 x 8mm socket head screw.
[* icon_note] Note on the corner cube, the small hole is pointing to the right in this image.