Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by Tony Akens

Edit approved by Tony Akens

Before
After
Unchanged

Step Lines

[title] Add Hardware to Top Left Extrusion
-[* black] Add Hardware to Top Left Extrusion
+[* black] Hold the Extrusion as it will be oriented on the printer (So the big hole on the corner cube faces up)
+[* black] Slide (8) m3 nuts into the top channel
+[* black] Slide (5) m3 x 10mm Hex Head Bolts in the outside channel
+[* black] Slide (4) m3 nuts in the inside channel
+[* black] Slide (6) m3 x 16mm Hex Head bolts in the bottom channel

Image 1

No previous image

Added