Changes to Step #10
Edit by Tony Pavlakis —
Edit approved by Tony Pavlakis
- Before
- After
- Unchanged
Step Lines
| [title] Add Hardware to Top Right Extrusion | |
| [* black] Slide (13) M3 nuts into the top channel | |
| [* black] Slide (4) M3 nuts into the inside channel | |
| [* black] Slide (5) M3 x 10mm Hex Head Bolts into the outside channel | |
| [* black] Slide (3) M3 x 16mm Hex Head Bolts into the bottom channel | |
| - | [* icon_caution] Be sure the orientation of the corner cube is correct. A large hole should face up, small |
| + | [* icon_caution] Be sure the orientation of the corner cube is correct. A large hole should face up, a small hole should be facing down, and a small hole should be facing towards the inside channel |