Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Tony Akens

Edit approved by Tony Akens

Before
After
Unchanged

Step Lines

[title] Add Hardware to Top Right Extrusion
-[* black] Add Hardware to Top Right Extrusion
+[* black] Slide (13) m3 nuts into the top channel
+[* black] Slide (4) m3 nuts into the inside channel
+[* black] Slide (5) m3 x 10mm Hex Head Bolts into the outside channel
+[* black] Slide (3) m3 x 16mm Hex Head Bolts into the bottom channel
+[* icon_caution] Be sure the orientation of the corner cube is correct. A large hole should face up, small hold face down, and a small hole face towards the inside channel

Image 1

Old Version

New Version