Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Tony Pavlakis

Edit approved by Tony Pavlakis

Before
After
Unchanged

Step Lines

[title] Attach Linear rail to Top Front and Top Back Extrusions
-[* black] Attach Linear rail to Top Front and Top Back Extrusions by sliding the m3 nuts into the inside channel on the extrusion.
+[* black] Attach Linear rail to Top Front and Top Back Extrusions by sliding the M3 nuts into the inside channel on the extrusion.
[* black] Roughly center the extrusion, and then snug up the bolts.
[* icon_caution] Do not overtighten the bolts, you just need them snug for now. They'll be tightened later.