Changes to Step #8
Edit by Tony Akens —
Edit approved by Tony Akens
- Before
- After
- Unchanged
Step Lines
| [title] Attach Linear rail to Top Front and Top Back Extrusions | |
| [* black] Attach Linear rail to Top Front and Top Back Extrusions by sliding the M3 nuts into the inside channel on the extrusion. | |
| [* black] Roughly center the extrusion, and then snug up the bolts. | |
| [* icon_caution] Do not overtighten the bolts, you just need them snug for now. They'll be tightened later. | |
| + | [* icon_caution] It is highly recommended to use a bit of masking tape to keep the carriage from sliding off of the linear rail. |