Changes to Step #8
Edit by Tony Akens —
Edit approved by Tony Akens
- Before
- After
- Unchanged
Step Lines
| [title] Attach Linear rail to Top Front and Top Back Extrusions | |
| - | [* black] Attach Linear rail to Top Front and Top Back Extrusions |
| + | [* black] Attach Linear rail to Top Front and Top Back Extrusions by sliding the m3 nuts into the inside channel on the extrusion. |
| + | [* black] Roughly center the extrusion, and then snug up the bolts. |
| + | [* icon_caution] Do not overtighten the bolts, you just need them snug for now. They'll be tightened later. |
Image 1
No previous image
Added