Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Tony Akens

Edit approved by Tony Akens

Before
After
Unchanged

Step Lines

[title] Install M3 Hardware into Linear Rail
-[* black] Install M3 Hardware into Linear Rail
+[* black] Use a bit of masking tape to keep your carriage from sliding off your linear rail.
+[* black] Select 4 evenly spaced holes in your linear rail.
+[* black] Install (4) m3 x 8mm Button Head Bolts & (4) m3 nuts in the holes selected. DO NOT TIGHTEN THEM FULLY. The m3 nut only needs to be threaded onto the tip of the bolt, you want a gap between the nut and the back of the rail.

Image 1

No previous image

Added