Changes to Step #4
Edit by Tony Akens —
Edit approved by Tony Akens
- Before
- After
- Unchanged
Step Lines
| [title] Attach Second Corner Cube to Top Left Extrusion | |
| - | [* black] Attach Second Corner Cube to Top Left Extrusion using (1) M3 x 8mm |
| + | [* black] Attach Second Corner Cube to Top Left Extrusion using (1) M3 x 8mm socket cap head screw. Be sure the large hole is up, small hole is down. |
| [* icon_note] Note on both corner cubes, the small hole is pointing to the right in this image |
Image 1
Old Version
New Version