Changes to Step #11
Edit by Tony Akens —
Edit approved by Tony Akens
- Before
- After
- Unchanged
Step Lines
+ | [title] Bed leveling |
---|---|
+ | [* black] Assuming all of the previous homing tests have worked, or any issues encountered have been resolved, you can now proceed with automated homing and bed leveling. |
+ | [* black] Power off the printer, and adjust the bed manually by turning the leadscrews until it's close to level. It does not have to be perfect, but should be close. |
+ | [* black] Power on the printer, and run the following to home all 3 axis: |
+ | [* light_blue] G28 |
+ | [* black] To level the bed, send the following gcode: |
+ | [* light_blue] G32 |
+ | [* black] The printer should probe 4 points on the bed, and return a status of the adjustments made. |