Changes to Step #9

Edit by Tony Akens

Edit approved by Tony Akens

Before
After
Unchanged

Step Lines

[title] Y Homing Test
-[* icon_caution] When running the following commands, a lot can go wrong. Keep your finger near the power switch just in case.
+[* icon_caution] When running the following commands, a lot can go wrong. Keep your finger near the power switch just in case. Read all of the instructions before beginnging.
[* black] Test Homing Y by running the following in the gcode console:
[* light_blue] G28 Y
[* black] Your hotend should move towards the front of the printer until the Y endstop triggers against the front X carriage.