Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Tony Akens

Edit approved by Tony Akens

Before
After
Unchanged

Step Lines

[title] X Homing Test
-[* icon_caution] When running the following commands, a lot can go wrong. Keep your finger near the power switch just in case.
+[* icon_caution] When running the following commands, a lot can go wrong. Keep your finger near the power switch just in case. Read all of the instructions before beginnging.
[* black] Test homing X by running the following in the gcode console:
[* light_blue] G28 X
[* black] Your printer should move to the left until it contacts the X endstop.