Changes to Step #8
Edit by Tony Akens —
Edit approved by Tony Akens
- Before
- After
- Unchanged
Step Lines
| - | [title] Homing Test |
|---|---|
| - | [* |
| + | [title] X Homing Test |
| + | [* icon_caution] When running the following commands, a lot can go wrong. Keep your finger near the power switch just in case. |
| [* black] Test homing X by running the following in the gcode console: | |
| [* black] G28 X | |
| + | [* black] Your printer should move to the left until it contacts the X endstop. |