Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Evan

Edit approved by Evan

Before
After
Unchanged

Step Lines

[title] Extruder Wiring Bundle
-[* black] All of your Y carriage items should already be mounted, now you'll add the wiring harness for the hotend.
+[* black] All of your Y carriage items should already be mounted. Now you'll add the wiring harness for the hotend.
[* black] There is a 36" zip tie inside the wiring bundle. One end of it slots into the wiring clip on the right side of the printer.
[* black] Run the ends of all the wires through the grommet you installed.
-[* black] The other end gets zip tied to the wiring mount on the extruder mount.
+[* black] The other end gets zip-tied to the wiring mount on the extruder mount.